Spectra Drop Shield

Spectrum Drop Shield rigid filters serve as efficient pre or final filters in air intake systems of Gas Turbines, in any environmental condition (including offshore, marine) and in any climate (including tropical). They efficiently remove airborne particulate matter but also snow, mist and fog, acting as a filter and a coalescer in one. DS rigid filters are specially designed for the elimination and drainage of free water and air borne salt crystals. Where subsequent final filters are placed, they protect them not only from coarse dust but also from running in wet conditions, thus significantly prolonging their life and increasing their operational safety.

  • Unique – combined coalescer and particle filter in one
  • Hydrophobic synthetic media
  • Patented sealed boot pocket design
  • Fully incinerable
  • High dust holding capacity
  • Burst strength of <  6000 Pa
  • DIN 53438-F1 Certified
EN779 ASHRAE 52.2 ISO 16890 Width (mm) Height (mm) Depth (mm) Initial Pressure Drop (Pa) Air Flow (m3/hr) No of Pockets
G4 MERV 8 ISO Coarse 65% 595 595 330 50 3400 6
G4 MERV 8 ISO Coarse 85% 595 595 620 35 3400 6
M5 MERV 9 ePM10 50% 595 595 330 85 3400 6
M5 MERV 10 ePM10 55% 595 595 620 55 3400 8
M5 MERV 9 ePM10 55% 595 595 620 50 3400 6
M6 MERV 12 ePM10 70% 595 595 620 90 3400 8
F7 MERV 13 ePM10 80% 595 595 620 110 3400 8